[Yaesu] RE: [1000mp] Re: Mark V Field Power Output Test Results

[Joe Subich, K4IK]

> Hi Tod et all,
>   I will post the data later today on the Mark V Field for 
> 100, 150 and 200 watts.

If you do, please post the test procedure, equipment configuration 
and current calibration certificate for the equipment.  

73, 

   ... Joe, K4IK 
 

>   ----- Original Message ----- 
>   From: Tod - Idaho 
>   To: 'All about Yaesu 1000mp' 
>   Sent: Friday, August 06, 2004 10:45 AM
>   Subject: RE: [1000mp] Re: Mark V Field Power Output Mod
> 
> 
>   Tom:
> 
>   Since you apparently have the necessary equipment to make 
> valid tests, could you please share with us the IMD numbers 
> of your Field for 100,150 and 175 watts? 
> 
>   Tod, KØTO
> 
> 
> 
>   > -----Original Message-----
>   > From: 1000mp-bounces at mailman.qth.net 
>   > [mailto:1000mp-bounces at mailman.qth.net] On Behalf Of Thomas 
>   > Giella KN4LF
>   > Sent: Friday, August 06, 2004 8:17 AM
>   > To: All about Yaesu 1000mp
>   > Subject: [1000mp] Re: Mark V Field Power Output Mod
>   > 
>   > Morris et all,
>   > 
>   > I used an HP8563E spectrum analyzer and some other equipment 
>   > to measure spectral purity at 100 watts, 150 watts and then 
>   > at 200 watts on the V Field.
>   > 
>   > There was no discernable spectral purity degradation at 150 
>   > watts and a very minimal amount of degradation at 200 watts 
>   > and still well within FCC requirements.
>   > 
>   > 73,
>   > Thomas F. Giella, KN4LF
>   > Plant City, FL, USA
>   > Grid Square EL87WX
>   > Lat & Long 27 58 31 44N 82 09 51 98W
>   > 
>   > PODXS 070 PSK31 Club Member #349
>   > 
>   > KN4LF Solar Space Weather & Geomagnetic Data Archive: 
>   > http://www.kn4lf.com/kn4lf5.htm
>   >