[Yaesu] Re: Yaesu Digest, Vol 13, Issue 15

[Dave Maley]

I sounds like your radio has got itself stuck in CW mode.  Have you tried a
system reset?
Dave...

>
> My FT1000D just developed a problem. I'm looking for some help here from
> someone who may have experienced a similar problem, or has knowledge about
> how to fix this.
>
> Here is the situation:
>
> The background audio has changed to become much more bass sounding. I now
> have to move the SHIFT knob from it s normal 12 o'clock position to the 2
> o'clock position to make the background sound normal again. The frequency
> display is now incorrect, and I notice this when in USB mode. When I
switch
> to USB, the frequency readout is 700 hz higher than it should be, both on
> transmit and receive (eg. I have to tune to 14.199.3 to hear a signal that
> is actually on 14.200.0. When the freq readout says 14.199.3, I'm actually
> transmitting on 14.200.0).
>
> When in CW mode, WWV  is zero beat on 10.000 mhz. When I switch to USB, I
> have to retune, and zero beat occurs at 9.999.3 mhz.
>
> Any advice here will be appreciated.
>
> 73, Dave - W5UN w5un at wt.net
>
> homepage: http://web.wt.net/~w5un    Grid: EM23mg
>
> RR 10, Box 27
> Mount Pleasant, TX 75455
>
> ------------------------------
>