[Yaesu] FT1000D Firmware 5.84

[Joe Subich, K4IK]

Berndt wrote:

>  
> The firmware, AFAIK, is not a PROM but a MCU chip. It is a 
> surface mounted device and hence not easy to replace with 
> standard tools found in the HAM shack. 

The firmware in the FT-1000(D) is a standard EPROM and is quite 
easily replaced.  One must remove the covers, "fold down" the 
front panel, and remove one shield cover (as I remember).  

73, 

   ... Joe, K4IK