[Yaesu] Band Data connector splitter for 1KMP

[Joe Subich, W4TV]

Ted,

I've never heard of a commercial splitter for the Band Data -
Yaesu provides a "loop through" connection in the FTV-1000
transverter so it's possible to connect both the MK V and
Quadra at the same time.   It would not be difficult to make
a "Y" cable but it would certainly be tedious and you would
need to take care to be sure that the FL-7000 and band decoder
had compatible voltages on the band data lines.

You might check with N4ATS since he's the FL-7000 expert.

73,

    ... Joe, W4TV


On 2/16/2012 11:11 AM, Ted Boerkamp wrote:
> Hello everyone..Just want to ask the multitudes of Yaesu 1000MP users if
> they
>
> have ever come across a circuit or product which allows you to supply the
> Band Data
>
> info from the radio to more than one device???
>
> I currently have the FL7000 amp connected to my 1000MP and the Band Data
> cable
>
> Is connected between the two for automatic band changes on the amp.
>
> Now I am trying to figure out how I can still provide Band Data info to a
> Band decoder
>
> Board for automatically switching antennas if the Band data jack is already
> used??
>
> Is there a splitter type cable or circuit available for this situation???
>
> Any ideas or feedback are greatly appreciated.
>
> Thanks
>
>
>
>
>
> Ted Boerkamp  VE3SS
>
> _______________________________________________
> Yaesu mailing list
> Yaesu at contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu
>