[Yaesu] Band Data connector splitter for 1KMP
tboerkamp at cogeco.ca
Thu Feb 16 12:26:09 PST 2012
Hi Joe....thanks for the advice....I cant be the only guy in the world
with a 1000MP and a FL7000 amp who wants to use the same band data for
an automatic decoder box (to switch antennas/filters etc.)... I am surprised
no one has asked this question before....
From: Joe Subich, W4TV [mailto:lists at subich.com]
Sent: Thursday, February 16, 2012 2:24 PM
To: Ted Boerkamp; yaesu at contesting.com
Subject: Re: [Yaesu] Band Data connector splitter for 1KMP
I've never heard of a commercial splitter for the Band Data -
Yaesu provides a "loop through" connection in the FTV-1000
transverter so it's possible to connect both the MK V and
Quadra at the same time. It would not be difficult to make
a "Y" cable but it would certainly be tedious and you would
need to take care to be sure that the FL-7000 and band decoder
had compatible voltages on the band data lines.
You might check with N4ATS since he's the FL-7000 expert.
... Joe, W4TV
On 2/16/2012 11:11 AM, Ted Boerkamp wrote:
> Hello everyone..Just want to ask the multitudes of Yaesu 1000MP users if
> have ever come across a circuit or product which allows you to supply the
> Band Data
> info from the radio to more than one device???
> I currently have the FL7000 amp connected to my 1000MP and the Band Data
> Is connected between the two for automatic band changes on the amp.
> Now I am trying to figure out how I can still provide Band Data info to a
> Band decoder
> Board for automatically switching antennas if the Band data jack is
> Is there a splitter type cable or circuit available for this situation???
> Any ideas or feedback are greatly appreciated.
> Ted Boerkamp VE3SS
> Yaesu mailing list
> Yaesu at contesting.com
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1913 / Virus Database: 2112/4813 - Release Date: 02/16/12
More information about the Yaesu