[Yaesu] FT1000MP and PSK31

[David Robbins]

In my setup I route the computer audio to both the mic jack and the packet
jack.  For doing rtty i use pkt-lsb which gets the audio from the rear
packet jack and also allows use of the narrow cw filters on rtty which can
be quite handy.  For psk I use usb which gets the audio from the mic jack
and lets you see the whole 2.5khz wide psk 'band' at once.

David Robbins K1TTT
e-mail: mailto:k1ttt at arrl.net
web: http://wiki.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://k1ttt.net:7373



-----Original Message-----
From: Yaesu [mailto:yaesu-bounces at contesting.com] On Behalf Of Ted Boerkamp
Sent: Sunday, March 19, 2017 02:49
To: Ve3_Contest at Yahoogroups.Com; Yaesu reflector
Subject: [Yaesu] FT1000MP and PSK31

Hello everyone....I have been active in RTTY using the MP for some time now,
having built my own interface.

Now I would like to try experimenting with PSK31 but I am not sure how much
different the interface has to be

from running RTTY??? I am able to receive PSK31 using DIGIPAN at this time
but cant get the transmit working.

I notice if I click on a macro, the PTT light in my interface lights but I
am not seeing any power transmitted from

the radio. I am not sure whether I need the MP to be in USB mode or using
PKT mode as I have seen videos

of guys using it both ways to transmit PSK31. Which way is best?? Does the
cabling differ for RTTY as compared to

PSK31.  You need cabling to handle signals in both directions from radio to
computer and vice versa, right??

What else am I missing?? I am running Win10 on the ham computer.

Any help on specifics for the FT1000MP would be greatly appreciated. I have
looked all over the net but don't seem

to find any specific info that I need.

Thank-you

 

Ted Boerkamp VE3SS

_______________________________________________
Yaesu mailing list
Yaesu at contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu