[Yaesu] Yaesu Digest, Vol 185, Issue 3

[Robert Shohet]

Hi John,

Thank you for your reply and the information.  I don’t know if your problem is the same as I one that I am having – it sounds like they are different.  I am going to do some more investigation – but I will keep your “fix” in mind.

Tnx & 73


Bob KQ2M


From: yaesu-request at contesting.com 
Sent: Wednesday, November 07, 2018 12:00 PM
To: yaesu at contesting.com 
Subject: Yaesu Digest, Vol 185, Issue 3

Send Yaesu mailing list submissions to
yaesu at contesting.com

To subscribe or unsubscribe via the World Wide Web, visit
http://lists.contesting.com/mailman/listinfo/yaesu
or, via email, send a message with subject or body 'help' to
yaesu-request at contesting.com

You can reach the person managing the list at
yaesu-owner at contesting.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Yaesu digest..."


Today's Topics:

   1. FT1000 MP Problems (jcowens1 at comcast.net)
   2. APF (jcowens1 at comcast.net)


----------------------------------------------------------------------

Message: 1
Date: Tue, 6 Nov 2018 09:37:30 -0800 (PST)
From: jcowens1 at comcast.net
To: yaesu at contesting.com
Subject: [Yaesu] FT1000 MP Problems
Message-ID: <53703315.466077.1541525851329 at connect.xfinity.com>
Content-Type: text/plain; charset=UTF-8

Robert (KQ2M):


Around 10 years ago, I was having problems with an intermittent DSP on my FT1000MP. That may be connected with the problem you are having. I could never find where the intermittent operation was coming from, so I ended up buying a new Analog DSP Board from Vertex Standard. The P/N is CA1444001 and costs  less than $150 after shipping and taxes. It was easy to remove and replace, and that fixed the problem.  Hope this helps.


John Owens - N7TK

------------------------------

Message: 2
Date: Tue, 6 Nov 2018 16:44:15 -0800 (PST)
From: jcowens1 at comcast.net
To: Yeasu Reflector <yaesu at contesting.com>
Subject: [Yaesu] APF
Message-ID: <254796856.481123.1541551455524 at connect.xfinity.com>
Content-Type: text/plain; charset=UTF-8

You will find the APF control useful to reduce band noise. Tune into a band at an open freq and adjust you APF while watching your S-Meter. My APF is on all of the time and usually around a setting of 1 which is where it reduces the band noise considerably. If I need it to peak a CW signal, I then move it to the correct setting to peak the signal I am trying to listen to. Other than that, my APF is on all the time and usually at a setting around 1. Try it while watching you S Meter. You will find it reduces band noise while not significantly affecting signals in the bandpass. 


John Owens - N7TK

------------------------------

Subject: Digest Footer

_______________________________________________
Yaesu mailing list
Yaesu at contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu


------------------------------

End of Yaesu Digest, Vol 185, Issue 3
*************************************