Amps
[Top] [All Lists]

[AMPS] Single band amp construction query

To: <amps@contesting.com>
Subject: [AMPS] Single band amp construction query
From: measures@vc.net (Rich Measures)
Date: Tue, 22 Apr 97 12:49:52 -0800
>Chad Kurszewski WE9V wrote:
>> 
>> >If one actually did build these amps with one common power supply 
...snip...
>> We have tried this, with two major requirements:
>> 
>> 1)  No HV present without filament voltage, both turn on and turn off.
>> 2)  No requirement to have all RF decks on at once.
>> 
>> We ordered large Dahl XFMRs to handle double the current and tried using
>> 2 RF decks per supply.  With the above requirements, the solution I came up
>> with was to have the RF deck control a Jennings RJ-1 HV vacuum relay to
>> switch the HV to the deck.
According to Jennings, the (copper-contacts) RJ-1A is not designed to 
switch DC.  However, Jennings makes a tungsten-contacts version, the 
RJ-1H, that is designed to hotswitch DC.  ...... Which version were you 
using, Chad.   

Rich---



R. L. Measures, 805-386-3734, AG6K   



--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com

<Prev in Thread] Current Thread [Next in Thread>