Amps
[Top] [All Lists]

[AMPS] Another arc question

To: <amps@contesting.com>
Subject: [AMPS] Another arc question
From: measures@vc.net (Rich Measures)
Date: Sat, 9 May 98 20:02:16 -0800
>Rich Measures wrote:
>>>Rich Measures wrote:
>>>>>Sample problem:   Part I:   Ls = 200nH, Rs = 200 ohms, f = 100MHz.  What 
>>>>>is the Admittance, Y, Mr.  White?  A running description of your solution 
>>>>>would be helpful.  
>>>>>
>>>>>No, I won't bite. There is absolutely no need to drag admittance into
>>>>>this discussion. 
>>
>>When L is in parallel with R, admittance Is the name of the game.  When L 
>>is in series with R, impedance Is the name of the game.  
>
>Not correct: when L and/or C and/or R are connected in parallel, there
>is NO automatic change into susceptance and conductance. These
>admittance parameters are only an alternative, optional route through
>the math. You can choose to stay in normal units of resistance and
>reactance, all the way.

In a parallel circuit, E is constant, and I is variable.  In a series 
circuit, I is constant and E is variable.  The "normal units" are 
different.  
>
>>
>>>>Then on to Part II:  what is the parallel-equivalent resistance of 200nH 
>>>>in parallel with 200 ohms at 100MHz?  (presumably using the method 
>>>>described below)
>>>>
>>>200 ohms, at ANY frequency, by definition - no calculation is required.
>>>
>>.....not the definition of Rp in Wes' measurements.  
>
>Or rather... not in your interpretation of "Rp" in Wes's measurements. 
>
>Wes - the guy who made the measurements - emphatically disagreed with
>your interpretation, and he made the measurements.
>
How could Wes' have possibly measured 166 ohms of Rp for a suppressor 
that uses a 109 ohm resistor?  
>>
>>>Part III - it's my turn: what is the series-equivalent form, ie what are
>>>Rs and Xs at 100MHz?
>>>
>>>XL = 2*pi*100E6*200E-9 = 125.66 ohms
>>>
>>>XL is equal to Xp by definition, because L and R are connected in
>>>parallel.
>>>
>>However, when an L, or a C, and an R are connected in parallel, we have 
>>susceptance and conductance in Siemens instead of reactance (X) and 
>>resistance in Ohms, which, at a discrete frequency result in an 
>>admittance (Y) instead of an impedance (Z).
>
>As I said above, that's not correct. Admittance, susceptance and
>conductance are merely an alternative route through the math. You can
>choose to stay entirely in resistance and reactance, as shown in my
>earlier posting which is completely standard network theory.

Uncomfy with conductance and susceptance?
>>  
>>However Y can be converted to Z, and vice-versa. 
>
> ...and when you do, you reach exactly the same impedance (R and X)
>results as I gave, only more slowly because of having taken an
>unnecessary detour into admittance.
> 
If the classical slow-route allows one to avoid stepping into a Quagmire, 
why not?   
>>
>>>R = 200 ohms = Rp by definition as we hopefully agreed above.
>>>
>>We do not because we are discussing Wes' measurements, not the *ARRL 
>>Handbook* (which used to be called the *Radio Amateur's Handbook*).  
>>
>If you don't agree that the parallel-equivalent resistance in a
>parallel-connected circuit is - by definition - just R itself, you're
>marching out of step with every definition "Rp" I've ever seen. 
>
We are talking about the Rp is Wes' measurements.  
>
>>>What do you make Xs, Rs and Q, Rich?
>>>
>>Q is not 1.59.  "Xs & Rs" look ok, however, Wes and I use "Rp" where you 
>>use "Rs" to designate the parallel-equivalent R.
>
>That's incorrect on three counts. 
>
>1. This "Wes and I" line won't stand up to examination. The record shows
>that Wes emphatically disagreed with Rich's interpretation of his
>measurements, so much so that he actually asked Rich to remove all
>reference to those measurements from his web pages; Rich refused. Wes's
>own web pages (referenced by Gerard a few days ago) tell the full story. 
>
The full story is that Messrs. Rauch and Stewart took the same position 
during the grate suppressor debate -- i.e., that the VHF-Q of a 
VHF-suppressor can be made as low using copper-wire as it can using 
resistance-wire.  They are right, however, to do so, one needs to 
increase R and increase L.  The net result is that more L and R increases 
the power dissipation in R at 28MHz.  Thus, the advantage of using 
resistance-wire in a VHF suppressor is that it reduces the dissipative 
burden in R.  //  Wes had already published his measurements on the 
Internet, so what purpose could possibly be served by not quoting them?   
Wes' Q and Rp measurements undoubtedly are an embarrassment.  .  To me, 
the incredible thing is that Mr. Rauch quickly removed his post of 
28-Nov., wherein he proposed using a suppressor L made of resistance-wire 
whose ESR was 5 ohms -- and he would not discuss the subject again, 
period.  However, Wes never seemed to notice.  

>2. My terminology and analysis agree exactly with Wes's. 

If 109 ohms = 166 ohms.  

>It was I who
>originated the log-log plot of suppressor Q versus frequency, and sent
>it to Wes. He agreed with my calculations and published it on his own
>web pages. 

You have not explained how lowering R is a parallel L/R suppressor lowers 
VHF-Q.  By your logic, the lowest Q would result when R = 0-ohms
>
>3. I'm the guy who keeps saying that the "s" in Rs stands for series-
>equivalent; and the "p" in Rp stands for parallel-equivalent. 

In some book it may.  In Wes' measurements, it undoubtedly does not.   

>Please
>read my earlier postings correctly, and don't stand them on their head.
>
One must stand on one's head trying to use resistance and reactance in a 
parallel L/R circuit.  
>
>Multiple series<->parallel transformations are an area where it's very
>easy to accidentally turn equations and/or terminology upside-down and
>come to exactly the wrong conclusions. I firmly believe that is what
>Rich is doing.
>
>I'm happy to leave Rich and Carl to discuss the hands-on aspects of
>suppressors, but I do feel it necessary to defend the good name of
>network theory when it's being misused. 
>
>
>It's nearly 0130 here. Goodnight, America.
>73 from Ian G3SEK          Editor, 'The VHF/UHF DX Book'
>                          'In Practice' columnist for RadCom (RSGB)
>                           http://www.ifwtech.demon.co.uk/g3sek
>
>--
>FAQ on WWW:               http://www.contesting.com/ampfaq.html
>Submissions:              amps@contesting.com
>Administrative requests:  amps-REQUEST@contesting.com
>Problems:                 owner-amps@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm


cheers
Rich...

R. L. Measures, 805-386-3734, AG6K   


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>