Amps
[Top] [All Lists]

[AMPS] Kenwood TS450 & SB-200??

To: <amps@contesting.com>
Subject: [AMPS] Kenwood TS450 & SB-200??
From: measures@vc.net (Rich Measures)
Date: Fri, 14 Aug 98 14:02:27 -0800
>At 12:38 PM 8/14/98 -0800, you wrote:
>
>>same V, less I in the 220.  
>>
>>>If so, then the TL-922 switching connection on the 450 definitely
>>>won't work.  Both the voltage and the current will be well out of spec.
>>>
>>use the npn switch circuit in The TS-440S circuit improvements article on 
>>my web site.    
>
>Then don't you think you should correct your posting to the reflector, Rich?

Yes.  If the TS-450 does not have an amplifier control relay, like the 
TS-440, it Very "probably" can Not.  The fix is to convert to positive 
relay control voltage, like the SB-220, and install high speed switching 
to make the old amplifier compatible with newer transceivers.  .   

>Tom tells me he's already ordered Harbach's soft-key module, so that
>problem is taken care of.  

This does not take care of the hotswitching problem.

>It'd be a shame if others ran into it, though,
>and concluded it was OK to wire direct to the transistor switch in the 
>TS-450.
>
True, Pete.  Hopefully, they would read the instruction manual first.  
Sorry, folks.    



Rich...

R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures  


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>