> So... just speculating... in a multi-band amplifier, would it make sense
> to wire the 10m pi-network permanently in place at the tube socket? On
> the lower bands, that network would look like capacitance, and it might
> be enough to compensate for a short coax link to the switched networks
> for all the lower bands.
>
I have found that at least mounting the "C2" cap in the 10 meter pi network
at the socket accomplishes this nicely. Did not think of mounting the whole
10m network there. Will try it next time.
(((73)))
Phil, K5PC
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|