On Mon, 29 Mar 1999 16:05:06 -0800 "Radiodan W7RF" <RFpower@radiodan.com>
writes:
>
>One thing I left out was that the new inverted vee cut for 3650 KHz
>would be
>coax fed.
Cut one for 3550 and the other for 3800. Run at as close to right angles
as you can and fed with one coax. You can run a 160M inv Vee down the
middle with negligible interaction.
Figure W VSWR curve on 80/75 and not exceeding 2:1 over most of the
band.
Coax feed and no tuner is the only way to go IMHO.....
73 Carl KM1H
>
>73, Dan Magro W7RF, (President WARC 1999, member SCDXC, SCCC)
>Manufacturers Rep & Distributor for HENRY RF Power Amplifiers.
>www.radiodan.com <http://www.radiodan.com> ??? RFpower@radiodan.com
><mailto:RFpower@radiodan.com> A trip to our web site is worth the
>click!
>
>
>
>
>
>--
>FAQ on WWW: http://www.contesting.com/ampfaq.html
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
>
___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|