Amps
[Top] [All Lists]

[AMPS] Bias for SB-220

To: <amps@contesting.com>
Subject: [AMPS] Bias for SB-220
From: yo3ctk@qsl.net (yo3ctk@qsl.net)
Date: Wed, 02 Jun 1999 17:03:06 +0300
W8JI:

The real problem is wasted power and heat. Letting the bias run  in
full-tilt on condition is like putting a 600-1000 watt space heater
the room.

Ok, let me see: 1500 out at 60% efficiency means 2500 in. If the bias
current is set at 20% max. plate current, zero signal plate dissipation
would be 500W. You're 3dB off, Tom.

Further, for 50% on, 50% off contest duty cycle, "wasted" dissipation
would be just 250W. Not much of a heater.

On the other hand, I could understand the economics behind EBS approach:
for a few dollars in parts, the manufacturer could use a smaller blower
with corresponding cost reduction. Not sure if an economy in the cooling
system department is a good idea, though.

73 de Mike, YO3CTK



--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>