Amps
[Top] [All Lists]

[AMPS] TL-922 Filament Transformer Protection

To: <amps@contesting.com>
Subject: [AMPS] TL-922 Filament Transformer Protection
From: measures@vc.net (Rich Measures)
Date: Mon, 7 Jun 1999 08:51:19 -0700


>
>>?  hotswitching causes a spark. 
>>
>>>I always thought anode current (other than bias current) was produce by a 
>>>driving signal.  
>>
>>?  The spark is connected to a wire that connects to the input of the 
>>tube. 
>
>Is the amplitude of a spark that is generated by hotswitching a 100W 
>signal on the input relay really large enough to drive the tube and 
>thereby generate a change in anode current on the output?
>
?  Would you expect a change in input potential to cause a change in 
anode current?
>
>Jon
>KE9NA
>
>
>-------------------------------------
>Jon Ogden
>KE9NA
>
>http://www.qsl.net/ke9na    <--- CHECK IT OUT!  It's been updated!!!!!
>
>
>"A life lived in fear is a life half lived."
>
>
>--
>FAQ on WWW:               http://www.contesting.com/ampfaq.html
>Submissions:              amps@contesting.com
>Administrative requests:  amps-REQUEST@contesting.com
>Problems:                 owner-amps@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>



Rich...

R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures  


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>