Amps
[Top] [All Lists]

[AMPS] TL-922 Filament Transformer Protection

To: <amps@contesting.com>
Subject: [AMPS] TL-922 Filament Transformer Protection
From: G3SEK@ifwtech.demon.co.uk (Ian White, G3SEK)
Date: Wed, 9 Jun 1999 13:28:45 +0100
Jon Ogden wrote:
>I sell resistors for a living.  High power resistors at that.  RESISTOR 
>DISSIPATION DROPS AS TEMPERATURE INCREASES!!!  That is a fact.  There is a 
>temperature at which a resistors dissipation is ZERO. 

There's one little word missing there: you mean dissipation RATING.

The resistor's dissipation limit is set by the maximum working
temperature, so the dissipation rating - the dissipation that is
available to be used - decreases with temperature.

If the resistor is already at its maximum working temperature, its
dissipation RATING is zero.

Maybe that little extra word doesn't matter, a lot of the time, but you
can't criticize Rich for using "dissipation" in its strictly correct
sense when you're not.

73 from Ian G3SEK          Editor, 'The VHF/UHF DX Book'
                          'In Practice' columnist for RadCom (RSGB)
                           http://www.ifwtech.demon.co.uk/g3sek

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>