Amps
[Top] [All Lists]

[AMPS] TL-922 Filament Transformer Protection

To: <amps@contesting.com>
Subject: [AMPS] TL-922 Filament Transformer Protection
From: G3SEK@ifwtech.demon.co.uk (Ian White, G3SEK)
Date: Tue, 15 Jun 1999 06:52:50 +0100
Rich Measures wrote:
>>>?  the R-sups in the 922 receive cool forced air and they are virtually
>>>HF-shorted by silver straps.  Does it seem likely that lower-band RF
>>>could damage these resistors?
>>
>>This brings us back to the old problem that we never know the condition
>>of the resistor (and/or tube) immediately before it failed. Was it still
>>like new, or had it already deteriorated way out of specification? Just
>>because the component finally failed on 80m, it doesn't mean that all
>>the damage was done on that band.
>>
>?  An intermittent push-push vhf parasite is typically so brief that it
>causes no external damage to R-sup.  Instead, the damage is internal,
>and, as such, can only be discovered with an ohmmeter.   However, damage
>from 10m fundamental energy always causes visible damage.
>
But that still doesn't answer the question. Nobody checks until *after*
the amplifier fails.

73 from Ian G3SEK          Editor, 'The VHF/UHF DX Book'
                          'In Practice' columnist for RadCom (RSGB)
                           http://www.ifwtech.demon.co.uk/g3sek

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>