Amps
[Top] [All Lists]

[AMPS] Peak reading vs True peak

To: <amps@contesting.com>
Subject: [AMPS] Peak reading vs True peak
From: measures@vc.net (Rich Measures)
Date: Wed, 23 Jun 1999 08:23:50 -0700


>
>Jim says:
>
>       >and modulating with a SSB note,the peak level is not much higher
>
>       If you have a single tone on SSB, the peak is equal to the average.
>       If you have two equal, sinusoidal, non-harmonically related tones,
>then the PEP is four times the rms. The 'average' power indicated is
>dependent on the type of RF to DC conversion used: there's often a factor of
>pi/2 comes in.
>
>       > Is there a difference between peak power and True peak power? 
>
>       damned if I know! Bit reminiscent of 'music power' ratings! I
>suspect it's back to the way in which a 'peak' reading voltmeter decide on
>the peak.
>
?  I saw a 115v, wet-dry shop vacuum cleaner with a "4.6 Peak 
Horsepower!" rating.  At 746w/horsepower, even assuming 100% efficiency, 
that's alot of amperes for a standard 20A ac outlet.  My guess is that 
advertised peak horsepower ratings are always "True".  
>
-  cheers, Peter


Rich...

R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures  


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>