This is a multi-part message in MIME format.
------=_NextPart_000_004B_01BF1AD2.4ABCBA40
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Have a SB200 linear and attemping to hook it up to a Kenwood TS940S. =
Kenwood (and the Manual) states that Pin 4 on the remote connector is =
Relay, Pin 2 is Ground, and Pin 6 is ALC. This is a 7 PIN DIN =
connector. I can not get closure of the relay between pins 4 and 2. Is =
there a special connector that I have to get from Kenwood? Is there some =
switch setting on the TS940 that activates the relay connections to the =
remote connector. Or can I assume the relay is defective. Has anyone =
experienced this problem or have any info on this. (Kenwood Customer =
Care was a little vague on this issue.) Thanks. Bill Droese W1DYH
------=_NextPart_000_004B_01BF1AD2.4ABCBA40
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=3D"text/html; charset=3Diso-8859-1" =
http-equiv=3DContent-Type>
<META content=3D"MSHTML 5.00.2614.3500" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Have a SB200 linear and attemping to =
hook it up to=20
a Kenwood TS940S. Kenwood (and the Manual) states that Pin 4 on the =
remote=20
connector is Relay, Pin 2 is Ground, and Pin 6 is ALC. This is a 7 =
PIN DIN=20
connector. I can not get closure of the relay between pins 4 and =
2. Is=20
there a special connector that I have to get from Kenwood? Is there some =
switch=20
setting on the TS940 that activates the relay connections to the remote=20
connector. Or can I assume the relay is defective. Has anyone =
experienced=20
this problem or have any info on this. (Kenwood Customer Care was =
a little=20
vague on this issue.) Thanks. Bill Droese =
W1DYH</FONT></DIV></BODY></HTML>
------=_NextPart_000_004B_01BF1AD2.4ABCBA40--
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|