Lane, I tune for rated screen current per tube specs
(careful of the screen rating of course)
usually loading on the heavy side, BUT you adjust the
plate tune for a peak in screen current NOT max output.
This is assuming the grid bias is correct for the level
of drive.
Mark WB8JKR
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|