Amps
[Top] [All Lists]

[AMPS] Network analysis of suppressors

To: <amps@contesting.com>
Subject: [AMPS] Network analysis of suppressors
From: 2@vc.net (measures)
Date: Sun, 5 Mar 2000 16:11:51 -0700
>
>Tom and Rich, please see my comments below:
>
>
>----------
>From:  Tom Rauch[SMTP:w8ji@contesting.com]
>Reply To:      W8JI@contesting.com
>Sent:  Sunday, March 05, 2000 4:39 AM
>To:    AMPS; measures
>Subject:       Re: [AMPS] Network analysis of suppressors
>
>
>Hi Rich,
>
>
>> >This almost sounds like your theory that photons arriving from outer
>> >space can make amplifiers on standby explode because the photons hit the
>> >amplifier so hard they make the standby relay arc, and the arcing relay
>> >starts a parasitic in what is an otherwise stable amplifier that is just
>> >sitting there on standby!
>> 
>> Borrow a geiger counter, Mr. Rauch, and tune in on what's happening on the
>> upper frequencies.  Be not surprised if you occasionally encounter some
>> humungous signals.
>
>Rich or Tom, please forgive me if I misrepresent any of your
>claims as I haven't been following this debate very closely
>and hence am not fully versed in the details of your respective
>positions. Regarding the idea that radiation single events can 
>cause significant current to flow in a high power vacuum tube, 
>this seems unlikely to me. 

As it first did to me, Mike.  My guess is that a photon strikes an atom, 
knocking loose a current carrier/electron, thereby causingthe tube to 
briefly conduct.    This causes several kV to appear across the bias 
contacts, which arc.  The contacts form a metal vapour arc.  Since the 
voltage drop across such an arc is low, the amplifier tube switches out 
of cutoff bias and an event could take place.  

cheers

--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>