Amps
[Top] [All Lists]

[AMPS] Network analysis of suppressors

To: <amps@contesting.com>
Subject: [AMPS] Network analysis of suppressors
From: W8JI@contesting.com (Tom Rauch)
Date: Mon, 6 Mar 2000 12:08:21 -0500
> What W8JI probably meant to say (and I *did* say, at that time) was that
> the use of nichrome in the suppressors made more difference to the Q at HF
> than it did at VHF. From N7WS's measurements, that was totally beyond
> dispute.
> 
> This would mean that for the same degree of effectiveness in suppressing
> parasitics at VHF, the losses in the nichrome suppressor at HF would be
> higher.


That's right Ian.

The primary advantage of nichrome in a suppressor is it lowers the 
HF Q more than it lowers the VHF Q.

On amplifiers with HF parasitics, that's a good thing. On amplifiers 
with VHF parasitics, it doesn't mean a thing. A conventional R/L 
suppressor would do just as well at VHF with only a minor change.

By the way, the nichrome suppressor submitted in the test was 
nothing like Rich's normal suppressor that he sold. The nichrome 
suppressor tested had a lot more inductance.

If you compare Rich's normal  suppressor with a stock AL-80B 
suppressor the stock AL-80B suppressor provides lower VHF Q 
than the Measures suppressor.


73, Tom W8JI
w8ji@contesting.com

--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>