Amps
[Top] [All Lists]

[AMPS] Dumb directly heated cathode amp operational questions

To: <amps@contesting.com>
Subject: [AMPS] Dumb directly heated cathode amp operational questions
From: Ian White, G3SEK" <g3sek@ifwtech.com (Ian White, G3SEK)
Date: Wed, 7 Jun 2000 21:27:49 +0100
Chris Tran GM3WOJ wrote:
>
>I'm feeling brave today and I'm going to disagree with you again, Rich !
>The standard Kenwood TL-922 has one of the worst cooling systems
>I've seen - far too little air movement, etc.. !
>Consequently, 922s are not very popular with contesters who like
>high duty cycles with loads of processing !
>
This could be a 50Hz/60Hz thing - blowers perform much more poorly on
50Hz.

73 from Ian G3SEK          Editor, 'The VHF/UHF DX Book'
                          'In Practice' columnist for RadCom (RSGB)
                           http://www.ifwtech.com/g3sek

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>