Hi Peter,
I don't know the answer to your question. I didn't see an RF current rating
in the Mil Spec. My experience with N's at 1500W on HF has been bad. I
have seen several failures. In one case, the connection was indoors.
Mike, W4EF...................................................
----- Original Message -----
From: <DF3KV@aol.com>
To: <W4EF@dellroy.com>; <amps@contesting.com>; <k6uj@pacbell.net>
Sent: Thursday, November 23, 2000 4:29 AM
Subject: Re: [AMPS] Hi Power Connectors
>
> Mike wrote:
>
> <According to MIL-PRF-39012, a series N plug is rated <for 1500 volts RMS
> <operating at sea
> <level when tested from 5.7 to 7 MHz. This corresponds <to 45KW across 50
> Ohms.
> <This power rating will of course decrease with the <square of VSWR.
>
> How will the N-connector behave with the 30 amps ?
>
> Spinner germany limits the N-connnector to 440 watts
> at 1 GHz, but build them for cable up to 1 5/8.
>
>
> Peter
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/amps
> Submissions: amps@contesting.com
> Administrative requests: amps-REQUEST@contesting.com
> Problems: owner-amps@contesting.com
>
>
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|