Amps
[Top] [All Lists]

[AMPS] Clipperton L amplifier

To: <amps@contesting.com>
Subject: [AMPS] Clipperton L amplifier
From: baycock@HIWAAY.NET (Bill Aycock)
Date: Wed, 24 Jan 2001 05:33:04 -0600
Rich- Thanks for the information- I am slowly learning a lot on this
subject., forgive  more questions. What type of resistors were they, and
what physical phenomenon causes the increase in R?  Was there any tube
damage, also?

The statements:
> The amp. was not being driven at the time.  
>
> max out / max drive. 
are a little inconsistent. Can you clarify which amps were operated which way?

Bill-W4BSG

At 11:32 PM 1/23/01 -0800, you wrote:
>>
SNIP
>>Were these amps that were measured while exhibiting intermittent vhf
>>oscillation damaged in any way by the oscillation?
>
>the vhf suppressor-R was typically damaged.  The resistance suddenly 
>increased 2x - 4x.
>
>
>-  Rich..., 805.386.3734, www.vcnet.com/measures.  
>end
>
>
-
Bill Aycock   ---   Persimmon Hill 
 Woodville, Alabama, US 35776
 (in the N.E. corner of the State)
      W4BSG   --   Grid EM64vr
        baycock@HiWAAY.net
             w4bsg@arrl.net

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>