[Top] [All Lists]

[AMPS] SB-1000 mods?

To: <>
Subject: [AMPS] SB-1000 mods?
From: (Tom Rauch)
Date: Fri, 7 Sep 2001 23:04:33 -0400
> Is there any reason that a glitch resistor is preferred over a fuse in
> the anode lead. I opened up my L-7 power supply last night and found
> that someone had replaced the 0.82 ohm glitch resistor with a fuse (I
> was planning to replace the 0.82 ohm resistor with a 50 ohm 50 watt
> power resistor as per the recommendation on G3SEK's website).

A .82 ohm resistor is not a glitch resistor or a fuse. 

Fuses are bad enough because of time delay and internal arcing, 
and resistors make very poor fuses.

Ian's website has good reliable information. He seems to believe in 
science, and Ohm's law.
73, Tom W8JI 

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>