[Top] [All Lists]

[AMPS] SB-1000 mods?

To: <>
Subject: [AMPS] SB-1000 mods?
From: (2)
Date: Sat, 8 Sep 2001 16:30:11 -0700
>> glitch resistor? I have some 25 ohm/25 watt Dale RER type metal body
>> resistors, but I am concerned that they might be prone to flash over
>> due to the relatively small gap between the leads and the metal case.
>> Presumeably a ceramic body wire wound resistor is the way to go.
>> Should I be concerned about inductance (L*di/dt kick) - some
>> wirewounds seem to be classified as "non-inductive" whereas some
>> aren't?
>The resistor must be surge rated for the voltage across the resistor 
>and the peak energy.
>RCD makes xxx-P series pulse rated resistors, or you can use a 
>"glow-bar" type. The RCD pulse rated resistor barely costs more 
>than a conventional wire wound resistor.

Tom:  Do u have a phone number or a URL?

-  R. L. Measures, 805.386.3734,AG6K,  

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>