> // The pin spacing in an N and a BNC are identical. Both breakdown at
> c. 4000v on my hi-pot tester.
I had quite a hard job to get the N series to survive
at 3500VDC in my HT PSU, lots of flashes, centerpins
was melt etc. Swaped to C connectors and has never
been a problems since.
Series C seems to be a great HT connector up to at least 4kV
although it has the same ratings as the N in my sheets....
> >If you really want high power handling, go with a 7/16 DIN. Overkill at HF
> >for sure though!
> // For tetrodes with handles on the 20m - 10m HF bands, quite probably
> cheers, Jon
> - R. L. Measures, 805.386.3734, AG6K, www.vcnet.com/measures.
> FAQ on WWW: http://www.contesting.com/FAQ/amps
> Submissions: firstname.lastname@example.org
> Administrative requests: amps-REQUEST@contesting.com
> Problems: email@example.com
FAQ on WWW: http://www.contesting.com/FAQ/amps
Administrative requests: amps-REQUEST@contesting.com