Amps
[Top] [All Lists]

[AMPS] Need HV connectors

To: <amps@contesting.com>
Subject: [AMPS] Need HV connectors
From: jstrohm@texas.net (jstrohm@texas.net)
Date: Mon, 19 Nov 2001 12:33:52 -0500
How about hot-rod spark plug wire?  This stuff is typically insulated past 
50kV, can be had with a stranded metal conductor, and has high-voltage 
terminals available  (called: spark plugs).

Jim N6OTQ

Original Message:
-----------------
From: Jerry Flanders jflanders2@home.com

What kind of socket/plug connectors are available for HV these days? I 
remember years ago guys just used common stuff like the "UHF" coax series, 
and also Millen made a commercial one.

I need to run a 3.5KV lead between my AL-1200 and this amp I am checking 
out. I would just use some coax and "UHF" connectors, but I am bothered by 
having a connector loaded with HV that looks like an innocent antenna 
connection. The HV lead might become permanent.



--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>