[Amps] Glitch resistors

[2@mail.vcnet.com (Richard)]

>
>
>Richard wrote:
>
>> >I am working on an amp with a pair of grid driven 4-400's. What size
>> >glitch resistor would be recommended for the plate circuit ?
>>
>> 1, 10 -15 0hms, 10w. vitreous enamel for up to 3kV.  2 in series for more
>> than 3kV or >30uF.
>
>This is a wire wound resistor ?
>
Yes, with nichrome wire, glass-coated.  
>>
>>
>> > Also what do you do about the screen ?
>>
>> Bypass each screen pin (2 & 4)with two, different value capacitors say c