[Top] [All Lists]

Hetaer volts, was RE: [Amps] Which 3-500Z

To: <>
Subject: Hetaer volts, was RE: [Amps] Which 3-500Z
From: (Martin Sole)
Date: Thu, 29 Aug 2002 08:51:41 +0700
'Singapore where they have 100v/200v, 50Hz'
Really?, I was there last week and it measured 236V (ish). Seem to
remember it's always been about that but I can only go back about 14
years. I recall JA as being a nominal 100V though.

Never knew they made Henry's in 9V. I go down there every couple of
months or so. But I bet there's nothing left to say they were ever

Martin de HS0/G4UQF

-----Original Message-----
From: [] On
Behalf Of 2
Sent: 29 August 2002 05:07
To: Steve Katz; Randall DuCharme; AMPS 
Subject: RE: [Amps] Which 3-500Z

The voltage on  1kd-5 and 2kd-5 filaments would be c. 5v in Singapore 
where they have 100v/200v, 50Hz..  As understand it, both amps were mfg 
in Singapore.

>When I had a 2KD5 many years ago, even its filament voltage was too 
>high with the normal 240V operating primary tap.  What were they 
>thinking?  (It was probably just about right for operating in VK with 
>265V line voltage...) -WB2WIK/6

-  R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K,  

Amps mailing list

<Prev in Thread] Current Thread [Next in Thread>