Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[Amps] Chimney Material

from [hahn] [Permanent Link][Original]
To: amps@contesting.com
Subject: [Amps] Chimney Material
From: hahn <hahn@emeraldis.com>
Date: Thu, 26 Feb 2004 07:24:11 -0500
List-post: <mailto:amps@contesting.com> 
Ok guys I found a cheap place to get silicone rubber; NAPA, yes the auto
parts supplier. They have gasket material 24"x12"x1/32" thick or
thicker. for about 5.99 a box rolled up. It a little stiffer but a whole
lot cheaper! It will stand temps of over 250 degrees. Check it out!
Chuck AI4BB


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Amps] sb-220 non uniform grid current ??, Eric Lowell
Next by Date:  Re: [Amps] ITT Jennings part numbers, Bob Maser
Previous by Thread:  [Amps] Chimney Material, Bob Maser
Next by Thread:  Re: [Amps] Chimney Material, Mike
Indexes:  [Date] [Thread] [Top] [All Lists]