Amps
[Top] [All Lists]

Re: [Amps] tuned choke

To: "John T. M. Lyles" <jtml@lanl.gov>," AMPS" <amps@contesting.com>, <nospam4me@juno.com>
Subject: Re: [Amps] tuned choke
From: R.Measures <r@somis.org>
Date: Tue, 30 Mar 2004 05:20:29 -0800
List-post: <mailto:amps@contesting.com>

>Skipp
>Tuned to resonance with no load, when you need it the most. When
>current load is increased, the tuned choke's equiv impedance falls to
>that of inductive reactance alone as the L changes (drops). That is
>enough for regulation under higher current.
>
?  Not only that, but a resonant-choke filter can handle  rapid
fluctuations in load current (as with SSB) , something that neither a
swinging-choke filter or an ordinary choke filter can manage.    And, as
an added FREE bomus, a FWB, resonant-choke filter allows about 20% more
DC current to be drawn than the transformer's AC-RMS rating - for the
same temperature rise  .   However, just the opposite effect applies to
capacitor-filter rectifier circuits.

cheerz
>>
>>
>>re: tuned filter power supply
>>
>>Is the target 'trap' frequency actually 120 Hz or
>>slightly above it?
>>
>>skipp
>>wv6f
>>www.radiowrench.com
>>
>>--------- Forwarded message ----------
>>From: "John T. M. Lyles" <jtml@lanl.gov>
>>To: amps@contesting.com
>>
>>The cathode (-) power supply may have a large steel canned capacitor
>>around 1 uF. It is rated for high AC voltage in doubler service, and
>>is usually polypropylene dielectric. If it is rated for few kV, it
>>makes a very nice capacitor for tuned filter power supplies, across
>>the appropiate choke to make a 120 Hz parallel 'trap'.
>>
>>John
>>K5PRO
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>