Amps
[Top] [All Lists]

Re: [Amps] 3-500Z Recomendations

To: "amps@contesting.com" <amps@contesting.com>
Subject: Re: [Amps] 3-500Z Recomendations
From: craxd <craxd1@ezwv.com>
Date: Sat, 02 Oct 2004 13:18:03 -0400
List-post: <mailto:amps@contesting.com>
I,m gonna go out on a limb here but here goes. Richardson Electronics pulls the strings on the Eimac tubes now. They also own the brand names Cetron and Amperex. They private label for everyone else too. When you get a tube from either, you don't know where it's made at! Knowing how Richardson does business, they're all probably from one manufacturer in China. I know of one Chinese manufacturer now selling direct here in the US who told me they were private labeling the 3-500Z and would not tell me to whom! My guess was RF Parts or Richardson. I do know most everything you'll get under Cetron is either Russian or Chinese. Now, I hate to be hard on Richardson but I know for a fact who they are and how they operate. I used to buy 1000's of tubes through their "shady" branch years ago from a salesman named Bernie Guss. Bernie, told me everything that was going on and who was who in both the legal and illegal business. Richardson is the very reason you can not now buy a new receiving tube of any type hardly as they were who bought out the GE plant down in Owensburogh Kentucky. Myself and two others offered to buy out the tube machinery lines for two models of tubes and Richardson flat out refused to sell them. I asked the manager what would then happen to the equipment. He said," It'll be put up in mothballs with dust settling on it", if I recall correctly. This was done purely to raise the price on receiving tubes and the price doubled shortly after that. The GE plant is now named MPD and Richardson is the proud owner.

What burns me about this, it's nothing but a monopoly, and the US government is letting them by with it! Just to put it bluntly, any name branded tube in the US, Richardson controls the pricing on. I cant say that Merit (RF Parts) buys from them but the tubes in big quantities has to come from somewhere. The only glass tube manufacturers that are left are in either Russia (Svetlana, Telsa), Yugoslavia (Phillips-EI) and China, with China being the prodomanent one. Chinas prodomanence is due to one thing, price!

Will Matney


The RF Parts/Taylor ZGs are excellent tubes. I've had mine nearly two years and they really take a beating!! I run mine mostly in AM in my Henry 3K-A and they just continue to pump out the power!! Still getting 2kW PEP from the Henry with ~100W drive...


Joe,
N3JI


"R.Measures" <r@somis.org> wrote:


On Oct 1, 2004, at 7:19 PM, Steven Cook wrote:


Team,

Anyone have data/idea/opinion on currently available 3-500Z fire bottles. I believe Eimac stooped making them, but have seen the Eimac part available albeit, at a high price; e.g., $250.00 and up.



Eimac 3-500Zs that were manufactured in Salt Lake City in the 1990s have a well-deserved reptutation for bad spotwelds in the anode cooler. When the welds let go, the anode-cooler will touch the grounded grid. The way to test for this problem is to slap the tube down into one's palm. If the spotwelds are bad, the anode cooler will bend. I have heard of no Chinese metal-anode tube with this problem. Graphite-anode tubes have no anode welds, so they can not have this problem.




What about the Amprex, Phillips, or Chinese bottles available through RF Parts, et al?


Where is the best place to purchase 3-500Z these days?

Should they be a matched pair if going into a TL-922A?

Are the graphite plate tubes O.K.?

Any comments, criticisms, concerns, attacks, cajoling would be appreciated.

Steve
WG7K
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps




Richard L. Measures, AG6K, 805.386.3734. www.somis.org


_______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>