Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

RE: [Amps] TL-922A - Loud Pop, Blown Fuses

from [Joe Subich, K4IK] [Permanent Link][Original]
To: "'Vic Rosenthal'" <vic@rakefet.com>,"'Amps Reflector'" <amps@contesting.com>
Subject: RE: [Amps] TL-922A - Loud Pop, Blown Fuses
From: "Joe Subich, K4IK" <k4ik@subich.com>
Date: Sun, 5 Dec 2004 18:49:33 -0500
List-post: <mailto:amps@contesting.com> 

> 
> In your position I would try one tube at a time.  I 
> understand your concern, however!
> 

Except, if I recall correctly, the TL-922 puts the 3-500Z 
filaments in series.  One cannot run the amplifier with 
only one tube!  

73, 

   ... Joe, K4IK 
 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Amps] TL-922A - Loud Pop, Blown Fuses, R . Measures
Next by Date:  Re: [Amps] Wanted - 50pf vac variable, Bill Turner
Previous by Thread:  Re: [Amps] TL-922A - Loud Pop, Blown Fuses, Vic Rosenthal
Next by Thread:  Re: [Amps] TL-922A - Loud Pop, Blown Fuses, Bill Turner
Indexes:  [Date] [Thread] [Top] [All Lists]