Amps
[Top] [All Lists]

Re: [Amps] GU-84B Cooling

To: Dan K9ZF <n9rla@yahoo.com>
Subject: Re: [Amps] GU-84B Cooling
From: R.Measures <r@somis.org>
Date: Wed, 20 Jul 2005 04:07:27 -0700
List-post: <mailto:amps@contesting.com>
On Jul 19, 2005, at 1:15 PM, Dan K9ZF wrote:

> Will Matney wrote:
>
>> So this brings the delima of how to cool it so one would get a long 
>> life out of it. One way would be add some sort of extra aluminum heat 
>> fins, or some made of brass, with fins sticking out to catch more 
>> air, thus increasing the overall surface area. The only other way 
>> would be to increase the amount of air flow and volume over the fins 
>> that's there. When doing this though, the noise goes up from the 
>> blower.
>>
>> Best,
>>
>> Will
>>
>>
>>
>
> Water cool it?

Large electric generators are cooled with hydrogen gas, which removes 
heat c. 5-times more efficiently than air-cooling.
>
> 73
> Dan
>
> -- 
> K9ZF /R no budget Rover ***QRP-l #1269
> Check out the Rover Resource Page at: <http://www.qsl.net/n9rla>
> List Administrator for: InHam+grid-loc+ham-books
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>

Richard L. Measures, AG6K, 805.386.3734.  www.somis.org

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>