Amps
[Top] [All Lists]

Re: [Amps] Proof of idiocy

To: HAROLD B MANDEL <ka1xo@juno.com>
Subject: Re: [Amps] Proof of idiocy
From: R@contesting.com;Measures <r@somis.org>
Date: Mon, 13 Mar 2006 08:50:52 -0800
List-post: <mailto:amps@contesting.com>
On Mar 13, 2006, at 4:43 AM, HAROLD B MANDEL wrote:

> It is possible that the threads are bunged on the
> leadscrew or the collar, but good  luck locating
> a tap or die!
>
> These threads are Jennings proprietary pitch
> and once fouled there is no way to chase them
> or to re-cut.

The threads are 1/4 - 23 -- for which taps and dies are available.
>
> The alternative is to substitute pieces from
> another vacuum variable and hope for the
> best.
>
> If the junction that pulls the bellows on the
> room-pressure side is gone and the threads are
> still good then the piece can be used for the collars
> and lead screw threading.
>
> Allen Bond and Economy sell very decent vacuum
> variables to the amateur. I have bought several
> ceramic and glass types from each. The most important
> feature is that both of these businesses HiPot each
> item before it ships and will not send a DOA or
> leaky variable.
>
> Buyer Beware: Things seeming to be too good to be
> true often are.
>
> Hal
> W4HBM
>
>
>
>
> On Sun, 12 Mar 2006 19:35:08 -0500 "Will Matney" <craxd1@verizon.net>
> writes:
>> $148 and gowing on! The only usable piece looks to me like would be
>> the flange on the rear. The high bidder now looks to be an
>> engineering firm......
>>
>> http://cgi.ebay.com/Jennings-Vacuum-Variable-Capacitor-5-kV-9-500- 
>> pF_W0Q
> QitemZ7597842893
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>



Rich Measures, 805.386.3734, AG6K, www.somis.org

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>