Tom W8JI wrote:
>I found the RSD-12V relay, but it is actually an AROMAT
>brand (data sheet says c2000 from Matsushita).
>I'll get samples and test them and publish the results.
>Anyone know what relay the TT uses? Or any other fast low
AD5X has two web articles on QSK conversions using the Nais / Matsushita
/ Panasonic DS2E-M-DC12V DPDT relay. (The same company seems to use a
number of different brand names, which surely doesn't help.)
In this article, the relay is used at the amplifier input only, with one
pole to switch the RF and the other to switch the PA bias. An RJ-1 or
HC-1 is used to switch the high-power RF output.
The second article is a QSK conversion for the ALS-600. It uses the same
relay at the output also, with its DPDT contacts paralleled to handle
the higher current.
73 from Ian GM3SEK
Amps mailing list