[Top] [All Lists]

Re: [Amps] wanted suitable blower for 8877 tube

To: "jeremy-ca" <>,"Mike, K6BR" <>,"'Fern Rivard'" <>, <>
Subject: Re: [Amps] wanted suitable blower for 8877 tube
From: "montytaylor" <>
Date: Sun, 19 Aug 2007 11:28:11 -0500
List-post: <>

I have one in my hand.  Specification sheet located at: , and look at the G2E085-AA19-15 
specs. Basically 26.5 CFM, 115VAC, 38 dBA, Ball Bearing Centrifugal Blower, 
Cast Aluminum. Back pressure curves are shown also.

This reason I have in my hand is because I upgraded due to changes in my 
AL-1500 to the G2E120-AR54-43 at 
152 CFM and 63dBA.  Physically larger, and I can switch speeds by switching 
in different capacitors.

Best regards,
Monty/WB5GLB since 1969 

Amps mailing list

<Prev in Thread] Current Thread [Next in Thread>