[Top] [All Lists]

[Amps] SB-200 circuit breaker

To: <>
Subject: [Amps] SB-200 circuit breaker
From: "Tom Osborne" <>
Date: Sun, 26 Aug 2007 18:51:42 -0700
List-post: <>
Hi Carl

I did that and the caps are barely warm, but the bleeders are really hot. 
Too hot to touch.


> - Leaky filter caps. A very good possibility if they are original. Leave
> the  amp on for a half hour or so and then shut off. Make sure the >HV is 
> down to  zero and pull the plug. Feel the caps. If they are more >than 
> just barely  warm they should be replaced. 

Amps mailing list

<Prev in Thread] Current Thread [Next in Thread>