[Top] [All Lists]

Re: [Amps] SB-200 circuit breakers

Subject: Re: [Amps] SB-200 circuit breakers
Date: Mon, 27 Aug 2007 04:04:21 EDT
List-post: <>
In a message dated 8/26/2007 9:36:31 P.M. Eastern Daylight Time, writes:

Filter  caps have been recently replaced. They are 100uf at 450 volts.  I see 
in the schematic that the originals were 125uf.  I will do the 'heat'  test 
and see if they do in fact get warm.

I think 100uf caps are too small a value, I would have opted for 150's or  
better.  I doubt if that is the problem though.   Lou

************************************** Get a sneak peek of the all-new AOL at
Amps mailing list

<Prev in Thread] Current Thread [Next in Thread>