The 3-500Z does it when the anode gets 4KV, otherwise its current is the
limit.
You are right with the 8877.
It all depends on the type of cathode.
73
Üeter
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Carl
Sent: Mittwoch, 23. Juli 2008 19:44
To: Gudguyham@aol.com; amps@contesting.com
Subject: Re: [Amps] Bill Orr comment
Depends on how much of a quack your resident guru is.
A 4-1000A will certainly fit that criteria as well as a 3CX1200. The 8877
wont and neither will a 3-500Z, at least by staying within ratings.
The 3CX1000A7 in my 2M amp is right at 2.0
Have you seen a possible pattern here?
If it sounds like a duck.......
Carl
KM1H
----- Original Message -----
From: <Gudguyham@aol.com>
To: <amps@contesting.com>
Sent: Wednesday, July 23, 2008 12:30 PM
Subject: [Amps] Bill Orr comment
>I was reading the Bill Orr handbook and on his section about amplifiers he
> says.....A properly designed grounded grid amplifier should produce 2 to
> 2.5
> times the plate dissapation of the tube in output. He did not put any
> limitations on the statement as to IMD or anything like that. He did not
> say if
> the tubes ratings would be surpassed (I am sure they would), but I think
> what
> he was saying is that the tube should continue to make power to 2 to 2.5
> times
> it's dissapation before it would not make any more power and flatten out.
>
> Upon speaking with an amp "Guru" about this subject, he procalimed that
> Bill
> Orr was a "QUACK". The basis of his claim was that he was never able to
> build an amplifier that obtained that kind of results.
> What say you? Lou W1QJ
>
>
>
> **************Get fantasy football with free live scoring. Sign up for
> FanHouse Fantasy Football today.
> (http://www.fanhouse.com/fantasyaffair?ncid=aolspr00050000000020)
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|