Amps
[Top] [All Lists]

Re: [Amps] QRO Heat management

To: <amps@contesting.com>
Subject: Re: [Amps] QRO Heat management
From: "David Cutter" <d.cutter@ntlworld.com>
Date: Mon, 10 Nov 2008 18:27:58 -0000
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Not sure if the obvious it has already been stated, but a crucial point is 
that the cooling air must be directed in the right place and that is quite 
tricky.  Tubes with their own ducted fans and chimneys are pretty much 
optimised, but other components are not so easy, particularly transformers 
which are not shaped for optimal air cooling.

Adding a fan to an enclosure already fitted with fans can disrupt a 
carefully worked out flow around many sensitive components and have a 
detrimental effect.

If additional cooling is desired using computer type fans, try adding the 
extra fan on top of the existing unit before anything else.  (Move the 
finger guard to the outside unit).

Trying to avoid buying a chiller in an industrial environment, I once tried 
adding an extra fan into a packaged 19" rack cabinet cooler and all it did 
was increase the power consumption.    It had already been optimised, of 
course.

Proper cooling starts at the design stage, it's not normally an after-sales 
booster.

David
G3UNA 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>