Hi Bill,
The device I've proposed is located in the plate supply line between the PS
filter caps and the tube.
It is NOT on the primary side of the supply.
73 & Good morning,
Marv WC6W
http://wc6w.50webs.com/
--- On Thu, 7/23/09, Bill, W6WRT <dezrat1242@yahoo.com> wrote:
> From: Bill, W6WRT <dezrat1242@yahoo.com>
> Subject: Re: [Amps] inexpensive HV fuse
> To: amps@contesting.com
> Date: Thursday, July 23, 2009, 8:37 AM
> ORIGINAL MESSAGE:
>
> On Thu, 23 Jul 2009 08:24:24 -0700 (PDT), Radio WC6W <wc6w_amps@yahoo.com>
> wrote:
>
> >
> > Damage is avoided by shutting off the power,
> veryyyy quickly, rather than by shunting it.
> >
>
> REPLY:
>
> Nothing wrong with shutting off the PS quickly, but if you
> leave the filter caps
> charged, any damage from the B+ arc will involve much more
> energy than if the B+
> line were opened by a fuse and/or limited by a glitch
> resistor and/or crowbarred
> to ground.
>
> In other words, the quick shut-off should not be the only
> protection device.
>
> 73, Bill W6WRT
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|