Interesting addition: LK-500 and its brothers have Grids direct to Ground,
no components.Cathode resistor only 0.15ohm/3W.
SB220 and L4(B) both 1ohm in cathode and they have the same grid components,
on schematics I have the RFC and C's are copies of each other.73, Thomas,
PY2ZXU/SM0CXU
On Thu, Jul 30, 2009 at 8:25 PM, Jack Shirley <jcshirle@gmail.com> wrote:
> I looked at the various 3-400 and 3-500 circuits in the Eimac Amateur
> Service Newsletters and did not find this mentioned anywhere.
>
> If the SB-220 and L4 use the same grid circuit, I could ask the engineer
> who
> designed the Drake L-4 as I know him personally. Any interest?
>
> 73 Jack N8DX
> On Thu, Jul 30, 2009 at 6:48 PM, Ward Silver <hwardsil@gmail.com> wrote:
>
> > > perhaps somebody with an SB-220 and a spectrum analyzer needs to do
> > > an IMD profile using each grid circuit and SEE which one produces the
> > > cleaner
> > > output.
> >
> > What?! And ruin a perfectly good thread?
> >
> > 73, Ward N0AX
> >
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
> >
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
--
Thomas, PY2ZXU/SM0CXU
Member of the PW2D Team
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|