OK, I have deleted over 100,000 "B- " messages. Maybe enuf???
Charles Harpole
k4vud@hotmail.com
> From: dezrat1242@yahoo.com
> To: amps@contesting.com
> Date: Mon, 9 Nov 2009 08:57:02 -0800
> Subject: Re: [Amps] B- questions
>
> ORIGINAL MESSAGE:
>
> On Mon, 9 Nov 2009 10:57:46 -0500, "Carl" <km1h@jeremy.mv.com> wrote:
>
> >I fail to see where you obtain a -3000V, perhaps its a terminology
> >confusion.
>
> REPLY:
>
> In a conventional GG amp, both B+ and B- are floating with respect to ground,
> except for the connection from B- to ground for the grid current meter.
>
> If the B+ arcs to ground anywhere and there is no clamping diode, the B- in
> instantly driven to the full negative HV with respect to ground. If your HV is
> 3000 VDC, the B- ;lead becomes -3000 VDC. The clamping diode from B- to ground
> prevents this.
>
> Incidentally, this is why one should never short the B+ to ground when trying
> to
> be sure the HV caps are discharged before working on the amp. Short B+
> directly
> to B- only, not to the chassis.
>
> 73, Bill W6WRT
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|