Has anyone had problems using a solid state relay to short out the step
start resistor in a power supply?
I have heard of problems of not enough current thru the SS relays (when amp
is in standby) when used as the primary on/off relay. Sometimes a resistor
has to be placed in parallel with the transformer primary so the relay works
properly.
When used in a step start circuit the current could be quite low as well as
the voltage at the relay due to the resistor across the relay. Any issues
here?
73
Gary K4FMX
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|