Amps
[Top] [All Lists]

Re: [Amps] Which LDG Autotuner for Amp Input?

To: paul@n1bug.com, amps@contesting.com
Subject: Re: [Amps] Which LDG Autotuner for Amp Input?
From: TexasRF@aol.com
Date: Sat, 9 Oct 2010 08:04:20 EDT
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Hi Paul, there is no reason the tuner "has" to be inside the amplifier is  
there? If so, maybe a tuner can be scavenged for the application.
 
When you pick a tuner, it needs to be a unit that retains the relay  
settings when turned off. Otherwise, it will be hunting as the amplifier input 
Z  
varies with speech waveforms etc.
 
There have been LDG models in the past used for QRP/portable work that  
operated this way to help conserve battery power. Their specs should cover this 
 issue.
 
73,
Gerald K5GW
 
 
 
In a message dated 10/9/2010 6:24:58 A.M. Central Daylight Time,  
paul@n1bug.com writes:

Lee  Buller wrote:
> But, I picked up the ARRL Handbook this morning on the  way to the 
"reading room" 
> and saw a project that used a commercial  auto tuner to do the job of the 
input 
> matching.  It is an LDG  autotuner they sell without a box.

This isn't in any of the Handbooks I  happen to own. I tried looking 
on LDG's web site but found no autotuner  without a box. Maybe it is 
a special order item? Does anyone have more  info on this?

I am looking for some way to get better SWR on my  homebrew amp 
input, and make it more consistent across all bands. It is a  
homebrew cathode driven 4CX1500B and I have no real idea what the 
tube  input impedance is. I opearate 99.9% CW so an autotuner might 
be an  attractive option *if* I can fit it in the box.

73,
Paul  N1BUG
_______________________________________________
Amps mailing  list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>