[Top] [All Lists]

Re: [Amps] 3-500z amp homebrew question

To: Mr Mike <>,
Subject: Re: [Amps] 3-500z amp homebrew question
From: Colin Lamb <>
Reply-to: Colin Lamb <>
Date: Sun, 12 Feb 2012 09:49:15 -0800 (GMT-08:00)
List-post: <">>
The rf choke needs to handle sufficient current to cause the high voltage 
overcurrent protection circuit to operate (normally a fuse) if the output 
coupling capacitor becomes leaky or shorts.  Because it is a high impedance to 
the rf, and the circuit is a low impedance point, almost no current will flow 
under normal conditions.

73,  Colin  K7FM
Amps mailing list

<Prev in Thread] Current Thread [Next in Thread>