Amps
[Top] [All Lists]

Re: [Amps] Relay suggestions please

To: Carl <km1h@jeremy.mv.com>, Amps@contesting.com
Subject: Re: [Amps] Relay suggestions please
From: Pete Smith N4ZR <n4zr@contesting.com>
Date: Fri, 09 Mar 2012 10:18:26 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Sorry - same guy, different company.  TopTen was what I meant.  W2VJN 
was responsible for the design of their 6-way relay box.  The ones W2VJN 
used in the antenna switch are Schrack RTD 14012.  See 
<http://www.mouser.com/Search/ProductDetail.aspx?qs=CNrsY6Bml5lyPTnKwpMBZw%3D%3D>.
  
$2.34 in onesie quantities.

I misstated a couple of specs - they rate their relay boxes for 1 KW 
RTTY to 30 MHz at swr of <1.5:1.  George told me he had tested to 3:1, 
so I suppose he was just being conservative.

73, Pete N4ZR
The World Contest Station Database, updated daily at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net, blog at 
reversebeacon.blogspot.com,
spots at telnet.reversebeacon.net, port 7000 and
arcluster.reversebeacon.net, port 7000


On 3/9/2012 9:48 AM, Carl wrote:
> WHAT antenna switches Pete?  I just happened to have the INRAD page 
> open on the other PC and dont see it.
>
> Carl
> KM1H
>
>
> ----- Original Message ----- From: "Pete Smith N4ZR" 
> <n4zr@contesting.com>
> To: <amps@contesting.com>
> Sent: Friday, March 09, 2012 5:07 AM
> Subject: Re: [Amps] Relay suggestions please
>
>
>> Steve, you might want to take a look at the PCB relays used by Inrad in
>> their antenna switches.  IIRC, they have been tested to 1.5 KW
>> continuous, 30 MHz and at 3:1 load SWR, and the last time I bought some
>> they were $2 each.  Amazing. W2VJN did the design and test.
>>
>> 73, Pete N4ZR
>> The World Contest Station Database, updated daily at 
>> www.conteststations.com
>> The Reverse Beacon Network at http://reversebeacon.net, blog at 
>> reversebeacon.blogspot.com,
>> spots at telnet.reversebeacon.net, port 7000 and
>> arcluster.reversebeacon.net, port 7000
>>
>>
>> On 3/9/2012 3:38 AM, Steve Thompson wrote:
>>> I'm looking at a lower cost alternative to a switching system that
>>> currently uses coaxial relays. Frequencies up to 30MHz, powers in
>>> the region of 1kW and continuous carrier has to be catered for,
>>> but no hot switching.
>>>
>>> Any suggestions for open frame or pcb types with a track record in
>>>    amplifier products?
>>>
>>> Thanks, Steve
>>> _______________________________________________
>>> Amps mailing list
>>> Amps@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/amps
>>>
>>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>>
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 10.0.1424 / Virus Database: 2113/4858 - Release Date: 03/08/12
>>
>
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>