With a slight reduction in readings. Using a Schottky diode would be a better
approach. I would replace both diodes in the SWR bridge with like diodes just
to keep some semblance of accuracy.
Glen, K9STH
Website: http://k9sth.com
________________________________
From: RAY FRIESS <rayfrijr@msn.com>
To: gzook@yahoo.com; amps@contesting.com; boatanchors
<boatanchors@mailman.qth.net>
Sent: Friday, May 4, 2012 9:57 AM
Subject: RE: [Amps] SB 200 problem
If it turns out to be a bad diode, and I cant gind a germanium, can I use a
regular power supply type diode to replace it?
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|